PS Audio Power Plant AC Regenerator

Further Information: 

The Power Plant is new.

I purchased this item with a plan to develop a media room. Circumstances changed and we have downsized.

Description

The Power Plant Premier is a power regenerator that adjusts the AC line voltage, producing a clean, low-distortion AC power supply. The Premier provides up to 1500 watts of pure and adjusted AC current. The Premier does not limit the dynamics or the sound stage. On the back of the Premier, the pure voltage is distributed to the equipment through 5 isolated outputs using magnetic filtering technology. The PS power products are built to the highest standards internally and externally and are equipped with 1/4 inch thick solid copper power rods, heavy extruded aluminum roofs and AC sockets with nickel-plated and hand-polished power supply port. Complete original packaging, remote control and documentation.

Here is a link to a review-

https://www.stereophile.com/powerlineaccessories/ps_audio_power_plant_premier_ac_regenerator/index.html

Specifications

AC regenerator. Nominal input voltage: 105–135VA US, 215–245VAC Europe/Asia. Maximum continuous load: 1200VA US, 1500VA Europe/Asia. Dynamic power delivery: 0.5s, >3600VA US, 5000VA Europe/Asia. Voltage regulation: ±0.5V US, 1VAC Europe/Asia. Output distortion, input 220–240VAC: 1200VA resistive load <0.9%. Output distortion, 230V: 240VAC, 1200VA reactive load <0.9%. Output distortion, input 110–130VAC: 1200VA resistive load, <0.5%. Output distortion, input 110–130VAC: 1200VA reactive load, <0.5%. Output impedance: <0.015 ohm. Noise reduction (all zones): 100kHz–2MHz, >80dB. Efficiency at 1200VA: resistive load, >80%; reactive load, >85%. Input frequency: 45–65Hz. Undervoltage limit: 90VAC US, 175VAC Europe/Asia. Overvoltage limit: 145VAC US, 275VAC Europe/Asia. Protection modes: L-N, L-G, N-G. Energy dissipation: 2160J US, 2142J Europe/Asia. Peak current surge: 144,000A US, 84,000A Europe/Asia. Maximum voltage surge: 6kV. Clamp level: 330V US, 800V Europe/Asia. Telco protection: 320J, 395V. Coax insertion loss: <1dB. DC trigger configuration: tip positive. DC trigger voltage: 5–15V DC. Dimensions: 17" (435mm) W by 4" (100mm) H by 16.5" (425mm) D.